The GM-1000 series features a unique dual-NAS architecture that delivers cost-efficient and space-saving advantages. It contains two replaceable TNS-h1083X NAS nodes, which are powered by Intel® Xeon® E processors and provide high-performance 10GbE / 2.5GbE connectivity and expandable I/O. M.2 and U.2 SSD interfaces are also included to enable cache acceleration for tackling the performance wall in bandwidth-demanding and low-latency business applications (such as intensive backup and virtualization). Both TNS-h1083X NAS nodes use the ZFS-based QuTS hero operating system that supports block-level inline data deduplication and compression, near-limitless snapshots, real-time SnapSync, and more business-oriented features to achieve reliable service-level agreement performance.
-
1
Economic and space-saving chassis design for dual NAS nodes and doubled performance.
Note: The GM-1000 does not support High Availability. -
2
Built-in 10GbE and 2.5GbE ports, PCIe slots, and M.2 SSD slots (NVMe Gen 3 x2) and U.2 SSD slots (NVMe Gen 3 x4 / SATA 6Gb/s) to increase performance potential.
-
3
The QuTS hero operating system combines ZFS advantages with the QTS App Center ecosystem to empower your business.
Specification
| CPU | Intel® Xeon® E-2236 6-core/12-thread processor, up to 4.8 GHz |
| CPU Architecture | 64-bit x86 |
| Floating Point Unit |
|
| Encryption Engine | (AES-NI) |
| Hardware-accelerated Transcoding |
|
| System Memory | 16 GB UDIMM DDR4 (2 x 8 GB) per node |
| Maximum Memory | 128 GB (4 x 32 GB) per node |
| Memory Slot | 4 x UDIMM DDR4 per node |
| Flash Memory | 5GB (Dual boot OS protection) |
| Drive Bay | 8 x 3.5-inch + 2 x 2.5-inch per node
The system is shipped without HDD/SSD.
For the HDD/SSD compatibility list |
| Drive Compatibility | 3.5-inch bays: 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives 2.5-inch bays: 2.5-inch SATA solid state drives 2.5-inch U.2 Gen3 x4 solid state drives |
| Hot-swappable | (Not supported M.2 SSD) |
| M.2 Slot | 2 x M.2 2280 NVMe Gen3 x2 slots per node
Compatible with NVMe SSD PCIe Gen 3 and above.
|
| SSD Cache Acceleration Support |
|
| 2.5 Gigabit Ethernet Port (2.5G/1G/100M) | 2 per node (2.5G/1G/100M/10M) |
| 10 Gigabit Ethernet Port | 2 x 10GbE SFP+ SmartNIC (Mellanox ConnectX®-4 Lx EN) |
| Wake on LAN (WOL) |
|
| Jumbo Frame |
|
| PCIe Slot | 2 per node Slot 1: PCIe Gen3 x4 (PCH) Slot 2: PCIe Gen3 x8 (CPU) |
| USB 3.2 Gen 2 (10Gbps) Port | 4 x Type-A per node |
| Form Factor | 3U Rackmount |
| LED Indicators | HDD, SSD, Status, Power, Fan, Temperaure, Node ID |
| Buttons | Power, Reset, OLED |
| Dimensions (HxWxD) | 132.1 × 481.7 × 623.4 mm |
| Weight (Net) | 25.21 kg |
| Weight (Gross) | 34.45 kg |
| Operating Temperature | 0 - 40 °C (32°F - 104°F) |
| Storage Temperature | -20 - 70°C (-4°F - 158°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | 770W(x2), 100-240V |
| Power Consumption: Disk Standby Mode | 169.68 |
| Power Consumption: Operating Mode, Typical | 201.07 W
Tested with drives fully populated.
|
| Fan | 3 x 60mm, 12VDC per node |
| System Warning | Buzzer |
| Standard Warranty | 3 |
| Max. Number of Concurrent Connections (CIFS) - with Max. Memory | 10000 |
