4-bay USB 3.2 Gen 1 RAID expansion enclosure
Supports QNAP NAS or Windows®, Mac®, Linux® computer
The TR-004 USB 3.2 Gen 1 RAID expansion enclosure allows you to expand the capacity of your QNAP NAS and PC. The TR-004 can also be utilized as a DAS (Direct-attached Storage) device, allowing you to directly access its content just by connecting it via USB. The TR-004 features four 3.5-inch SATA drive bays with multiple RAID configuration options and USB 3.2 Gen 1 Type-C connectivity to bring you a highly reliable and secure storage capacity expansion solution.
Non-Server versions of Windows have a 63TB limit for a single volume. Thus, when connecting QNAP storage expansion products, the same limitation applies. For volumes larger than 63TB, it is recommended to use the Windows Server operating system.
-
USB 3.2 Gen 1 (5Gbps)
USB 3.2 Gen 1 Type-C port* for faster data transfer.
Maximum 1M USB cable is recommended.
-
Supports SATA drives
Supports up to four SATA drives for reliable read and write performance
-
Disk mode DIP switch
Disk mode DIP switch to change from Hardware Control and Software Control configurations for setting RAID group.
-
Lockable drive trays
Lockable hard drive trays to prevent accidental drive removal.
-
Easy to eject
Eject button for disconnecting the TR-004 from a NAS or computer*.
Specification
| JBOD Connection Interface | USB |
| Main chip | Micro processor with hardware RAID |
| Drive Bay | 4 x 3.5-inch
The system is shipped without HDD.
|
| Drive Compatibility | 3.5-inch SATA 3Gb/s slot (supports SATA 6Gb/s hard drives with backward compatibility, performance limited to 3Gb/s) 2.5-inch SATA 3Gb/s slot (supports SATA 6Gb/s hard drives with backward compatibility, performance limited to 3Gb/s) 2.5-inch SATA 3Gb/s slot (supports SATA 6Gb/s solid state drives with backward compatibility, performance limited to 3Gb/s) You can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.
TR-004 does not support the QDA-A2AR/ QDA-A2MAR. |
| Hot-swappable | yes |
| USB 3.2 Gen 1 Port | 1 x Type-C USB 3.2 Gen 1 (USB 3.2 Gen 1) |
| Form Factor | Tower |
| Dimensions (HxWxD) | 168.5 × 160.2 × 219 mm
Dimensions do not include foot pad (foot pad may be up to 30mm / 1.18 inches high depending on model)
|
| Weight (Net) | 3.18 kg |
| Weight (Gross) | 3.18 kg |
| Operating Temperature | 0 - 40 °C (32°F - 104°F) |
| Storage Temperature | -20 - 70°C (-4°F - 158°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | Minimum 60W adapter (12VDC), 100-240VAC |
| Power Consumption: HDD Sleep Mode | 4.17 W |
| Power Consumption: Operating Mode, Typical | 18.21 W
Tested with drives fully populated.
|
| Fan | 1 x 120mm, 12VDC |
| System Warning | Buzzer |
| Kensington Security Slot | yes |
| QTS / QuTS hero | yes |
| Windows | yes |
| Ubuntu | yes |
| Mac | yes |
| Used as Hardware RAID (DAS) | yes |
| Standard Warranty | 2 |
| RAID 10 | yes |
| RAID 5+ Spare | yes |
| RAID 5 | yes |
| RAID 1 | yes |
| RAID 0 | yes |
| JBOD | yes |
| Single Disk | yes |
